Full In-House Manufacturing
“One factory owns every step — and every result.”
Laser cutting, welding, polishing, PVD coating, QC photos, and export packing stay under one roof.
Drawing, grade, finish, and QC checked before cutting.
SPEC MAP
Clarify these before drawings move to quote.
Interior, exterior, coastal, or high-traffic.
Privacy, airflow, shade, and light.
Brushed, mirror, powder coat, or PVD.
Frames, holes, joints, labels, and crates.
Send drawings with these 4 notes.
Screen layouts for facades, courtyards, and exterior privacy zones. Use this route when the brief needs airflow, shade, privacy, and a strong exterior identity.
Control sightlines without turning the balcony into a wall. We help pick perforation, laser-cut, or expanded metal based on openness and fixing.
Define zones without closing the room. Choose pattern density, PVD color, and frame detail before production drawings are approved.
Add pattern and safety to railings, fences, and boundary walls. We review opening size, fixing, and finish before the quote is locked.
Turn an entrance into a project signal. We adapt the pattern to the gate frame so detail, privacy, and structural fit stay balanced.
Convert blank walls, columns, and reception areas into feature surfaces. We help confirm panel size, joint rhythm, finish, and packing plan.
Send elevation drawings, rough panel sizes, privacy target, and finish direction. We will confirm the production route before quoting.
Yes. We can adapt geometric, Islamic, floral, or brand patterns into a manufacturable laser-cut file.
Use 316 for coastal, humid, poolside, or high-exposure locations. 304 can work for protected exterior areas.
Yes. Share frame dimensions and finish direction so panel thickness, fixing holes, and finish path align early.
Most interior panels use perimeter frames for clean installation. Frameless options depend on size, thickness, and fixing method.
Yes. Samples help confirm pattern scale, finish, and reflection before full production.
Yes. Send the frame drawing and fixing plan so holes, slots, and edge offsets are cut in production.
Material grade, panel thickness, pattern density, finish, and total quantity drive most of the cost.
Yes. A site photo plus rough dimensions is enough to start. CAD drawings make the quote faster and more precise.
Yes. We can specify finish and fabrication details so the gate reads cleanly from both directions.
Panels are film-protected, separated with EPE foam, labeled, and packed in reinforced plywood crates.
Yes. We review joint rhythm and pattern repeat in the production drawing before cutting.
WHY LEADING PROJECTS CHOOSE US
Compare the details buyers usually worry about: route, finish, QC proof, packing, and repeatability.
Full In-House Manufacturing
“One factory owns every step — and every result.”
Laser cutting, welding, polishing, PVD coating, QC photos, and export packing stay under one roof.
PVD Finish Samples
“Approve the sample once. Match the batch before it ships.”
Rose gold, black titanium, champagne, bronze, brushed, mirror, and custom color routes are confirmed before production.
Pre-Shipment QC Reports
“You see the panels before they leave the factory.”
Orders are photographed, measured against drawings, checked for finish consistency, and documented before packing.
Custom Patterns, Any Scale
“Send the idea. We turn it into a production drawing.”
Sketch, CAD, photo, or reference image can be converted into manufacturable panel layouts for approval.
PATTERN DIRECTION
Pick the closest visual direction, then send your drawing, photo, or reference. We adapt scale, privacy, finish, and fixing before production.
Start here when the drawing needs privacy, airflow, and a strong screen identity.
Mashrabiya pattern
Dekorative Abschirmung
Mashrabiya pattern
Dekorative Abschirmung
Mashrabiya pattern
Architektonische Abschirmung
Use geometric routes when the project needs repeatability, straight edges, and a cleaner modern read.
Choose floral or softer ornamental directions when the brief needs decoration first and privacy second.
If you already have a sketch, DXF, AI file, or photo, this route turns it into a manufacturable panel set.
Send the closest pattern direction, a site photo, or your drawing package. We reply with the next quoting step within 24 hours.
Design review, laser cutting, welding, finishing, inspection, and export packing stay in one controlled route.
Pick the project closest to your application. Each card opens the gallery context behind the screen type, finish, and site condition.
Large exterior screens where shade, airflow, finish, and repeatability all matter.
Decorative partitions that keep the lobby open while giving zones a premium finish.
Marine-grade material, fixing detail, and finish route set before production.
Sharp pattern detail and controlled grille spacing for commercial interiors.
Color-matched panels reviewed as one batch before packing and shipment.
How We Work With You
Each step has a gate. Nothing moves forward without sign-off, drawings, samples, or QC proof where the project needs it.
What We Check
Route, tolerance, sheet size, finish path
Lead Time
24h
What We Check
Burr level, flatness, finish, pattern quality
Lead Time
3-5 days
What We Check
Laser, perforation, expanded metal route
Lead Time
Per batch
What We Check
Deburr, polish, brushed, mirror, PVD
Lead Time
1-3 days
What We Check
Photo report, labels, protective film, crate
Lead Time
Same day
Technical
The numbers that matter for your project tender. Engineering grade precision.
Elevations or a dimensioned sketch with opening width, height, and fixing zone. A finish reference and the quantity band shorten the first reply further.
Send the application and the exposure conditions. Interior partitions usually sit at 1.5–3mm; exterior and structural runs move up, and coastal sites move to 316L.
Reinforced wooden crates with protective layering, photographed before dispatch. We quote EXW, FOB, CIF, or DDP depending on what the project needs.
Need a custom spec? Send Drawings for Free Review · WhatsApp Drawings.
304 stainless steel works for most interior screens, partitions, wall panels, and protected exterior areas. 316 stainless steel is better for coastal, marine, poolside, and high-humidity environments.
Send the installation location and exposure level with your drawing. We will recommend the grade before quoting.
Common finishes include brushed hairline, mirror, bead blast, satin, vibration, etched surfaces, powder coat, and PVD colors.
| Finish Path | Best Use | Notes |
|---|---|---|
| Brushed / Satin | Interiors, partitions, wall panels | Clean architectural look with lower reflection |
| Mirror / Vibration | Feature walls, luxury lobbies | Higher visual impact and stronger light response |
| PVD Color | Gold, bronze, black, champagne screens | PVD colors, sample approval before batch production |
Yes. Send a sketch, CAD file, DXF, AI file, photo, or reference image. We convert it into a manufacturable pattern and return a production drawing for approval.
Simple adaptations of existing patterns are usually handled inside the quote. Fully custom engineering is confirmed before we begin.
Standard patterns usually start from 30 sqm. Custom patterns usually start from 50 sqm. Sample panels can be made before production so you can confirm material, finish, and pattern scale.
Send the application, approximate dimensions, quantity, preferred material, finish, and any drawings or reference images. We reply with method recommendation, production notes, lead time, and pricing.
Samples usually take 7–12 working days. Standard production usually takes 15–20 working days. Custom finishes, larger quantities, and complex fabrication can take longer.
Yes. We ship by sea freight or air freight depending on timeline and order size. Panels are protected with film, separated with EPE foam, labeled, and packed in reinforced plywood crates.
Send us your drawings, a sketch, or even a photo. We'll get back with a detailed quote in 24 hours.
We respond within 24 hours